電熱水鍋爐采暖生活中越來越常見，電熱水鍋爐安全使用需要遵守操作規章制度。保障電鍋爐的安全操縱,避免發生各種事故，電熱水鍋爐在使用的時候一定要遵循以下原則。
　　
1、在使用電熱水鍋爐http://www.nmsxkj.com/的時候，操作使用電熱水鍋爐的工人一般要進行嚴格的崗前培訓。
Using electric water boiler when using electric water boiler workers to operate generally rigorous pre-service training.

2、電熱水鍋爐投用前應經當地勞動部分鑒定合格，具備壓力容器使用合格證。電熱水鍋爐點火前檢查水位以及送引風機有無磨損和電纜完好情況。隨時監視壓力、溫度和燃燒情況，正確調解各種參數，做到煤能完全燃燒，壓力表不超壓，溫度計不超溫。
Front electric water boiler should be put into use by the local part of the identification of qualified labor, with the pressure vessel certificate. Check the water level before electric water boiler ignition and send draft fan for wear and cables in good condition. At any time to monitor pressure, temperature and combustion conditions, proper mediation of various parameters, so that the coal is burnt, no overpressure gauges, thermometers not over-temperature.

3、做好電熱水鍋爐http://www.nmsxkj.com/的日常維護和保養工作，及時沖洗水位表、壓力表、排污試驗安全閥等。隨時檢查鍋爐進孔、手孔、受壓部件以及省煤器、過熱器等是否有泄漏、變形等異常現象，發現題目及時停爐檢驗，嚴禁在鍋爐有壓力和水溫大于40℃時更換部件或檢驗。
Electric water boilers do routine maintenance and repair work, and timely rinse water gauge, pressure gauge, safety valve and other emissions test. Feel free to check the boiler into the hole,hand hole, pressure parts and economizer, superheater and other leaks, deformation and other anomalies, identify problems and timely shutdown inspection, non-replaceable parts in the boiler pressure and water temperature higher than 40 ℃ or test.

4、 隨時檢查給水泵、送風機、引風機等的運轉情況，出現磨損或噪聲較大時應停機檢驗。
Always check to pumps, blowers, fans and other operating conditions cited, worn or noisy should stop testing.